0.83kg Environment Friendly 12V LED Light Battery With 6Ah Capacity
Replace the traditional lead acid batteries
long lifespan & powerful & reliable
lighter & smaller and environment friendly
1. LED Light battery packs 12V 6Ah advantage
- High intrinsic safety
- Quick charge capability.
- Can be used in any position
- More than 2000 cycles (at 100% discharge)
- Extremely resistant to high current (10C continuous, 20C pulse)
- Temperature range: -30 to +60ºC
- 1/3 weight of lead-acid batteries
- Lifespan > 20 years
- BMF protective circuit
- Can be replaced 1:1 with lead-acid batteries.
2. LED Light battery 12V 6A Specification
|3||Minimum Capacity||5.7Ah||Follow< GB/T18287-2000 >|
|4||Battery internal Impedance|
|Internal Impedance Testing Machine( HIOKI 3555,1kHz )|
|gross weight||Approx:0.83kg||electronic scale|
|7||Working Temperature||Charge||0~45℃,45~85%RH||Temperature & Humidity Instruments|
|8||Storage Temperature & Humidity Range||Short: above one month||-20~+55℃,45~85%RH||Temperature & Humidity Instruments|
|Medium: above three months||0~+45℃,45~85%RH|
|Long:above one year||+5~+30℃,45~85%RH|
Allowed maximum continuou
|10||Allowed maximum continuous discharge current||6A(1C)||Multi-meter|
|11||Allowed maximum reverse charge voltage||NO Allowed||/|
|12||Allowed maximum charge voltage||14.6±0.1V||Multi-meter|
|13||Discharge cut-off voltage||9±1V||Multi-meter|
3. Deep cycle lithium battery packs 12V 6Ah safety test
@Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%.
|1||Short-Circuit||The battery should be no remarkable breakage, distortion. And
charge normally.||Use a resistor with less than 0.05Ω to make the battery short
circuit for 1 hour. The appearance and characteristics are normal.|
|2||Over Discharge Protection Test||The battery should be no remarkable breakage, distortion.
Appearance and charge are normal.||Discharge the battery at the rate of 2A with the load of 30Ω for
24h . Charging for 10sec with specified adapter , and check the
|3||Impact Test||The battery should be no explosion or catch fire||Place a full charged battery on a flat and put a stainless steel
stick (Diamond 15.8mm) in the middle of the battery upright . Beat
the steel stick with 9.1Kg|4. Storage & Transportation
- Based on the character of cell, proper environment for
transportation of LiFePO4 battery pack need to be created to
protect the battery.
- Battery should be stayed in the warehouse -20℃～35℃ where it’s dry,
clean, shade, and well-ventilated.
- The battery should be stored in 50% SOC during transportation.
- The battery need to be charged every 6 months if out of use
- Keep the battery against dropping, turning over and serious
stacking during loading.
5. Our service
- Customized is allowed;
- Support imprint your logo on products;
- Products have proceeded comprehensive testing before shipment
Your inquiry will be warmly welcomed, looking forward to our long